Skip to main content

Hysteresis



Hysteresis


[caption id="attachment_997" align="alignnone" width="1080"]B-H Curve | Saturated | Hysteresis B-H Curve | Saturated | Hysteresis[/caption]

This connection between B and H is shown in fig. which show that the connection between B and H for a ferromagnetic. The material is both non – straight and multi-esteemed it is called B-H curve. Another fascinating characteristic of the material is upbraided when the field force having being expanded to h1. It is discovered that the material restricts the polarization and charging curve but rather along a curve situated above 0. it is seen that when age is the arrival to zero being is never again zero this happens because of a portion of the spaces arranged toward the initially connected field. 

As charging power H where is through numerous indistinguishable cycles the graph of B v/s H. progressively approaches a settled shut curve as shown in fig. the B is continually falling behind H. Thus when h is o, B is limited and +ve as at b and when B is 0as at point C, H is limited and - ve. This inclination of the transition thickness to leg behind the field power is called hysteresis and the shut circle abcdea is called hysteresis circle. 

When the material is in this cyclic condition the measure of attractive field force required to lessen the remaining. Transition power to zero is known as destructive power. The maximum. estimation of destructive power is called destructiveness.

More Post

Hydroelectric Power: Definition | Hydroelectricity Work



Popular posts from this blog

Limitations of Terzaghi Theory

Limitations of Terzaghi Theory The value of the coefficient of consolidation has been assumed to be constant.  The distance d of the drainage path cannot be measured accurately in the field. The thickness of the deposit is generally variable, and an average value has to be estimated.  There is sometimes difficulty 1n locating the drainage face, sometimes thin previous seams that can act as good drainage face are missed in the boring operations. The equation is based on the assumption that the consolidation is one-dimensional. In the field, the consolidation is generally 3-dimensional. The lateral drainage may have a significant effect on the time rate of consolidation. The initial consolidation and secondary consolidation have been neglected. Sometimes these form an important part of the total consolidation. In actual practice, the pressure distribution may be far from linear or uniform. Read More Muller-Breslau principle

Price Guard Wire Method

Price Guard Wire Method Some form of  Price Guard Wire Method  is generally used to eliminate the errors caused by leakage currents over insulation. Fig. 3.14 illustrates the operation of This Method. In fig 3.14(a), a high resistance mounted on a piece of insulating material is measured by the ammeter voltmeter method. The micro-ammeter measures the sum of the current through the resistor (IR) and the current through the leakage path around the resistor. The measured value of resistance computed from the readings indicated on the voltmeter and the microammeter, will not be a true value but will be in error.   Figure 3.14 Application of  guard  circuit for measurement of high resistance In fig, 3.14 (b), the  guard  terminal has been added to the resistance terminal block. The  guard  terminal surrounds the resistance terminal entirely and is connected to the battery side of the micro-ammeter. The leakage current IL now

Negative Booster

Negative booster A negative booster is employed to conform to the regulation that the potential difference between any two points of the rail return shall not exceed 7 V. Two boosters, positive and negative, are used which are mechanically coupled together and driven by a DC motor. The positive booster is connected to the trolley wire (near the generating station) and the negative booster (separately excited) is connected to the track rail.  The 'positive booster' adds voltage to the line while the 'negative booster lowers the potential of the point it is connected to. As we go along the trolley wire away from the generating station/sub-station, the potential drop increases, and the voltage of the trolley wire falls. Since the current returns via the track rail points away from the generating station acquire high potentials. This potential is brought down by the negative boost provided by the negative booster. When the load is sufficiently far aw