Skip to main content

Superposition Theorem Statement ||What Is Superposition Theorem

Superposition theorem depends on the idea of linearity between the reaction and excitation of an electrical circuit. It expresses that the reaction in a specific branch of a direct circuit when different free sources are acting in the meantime is equal to the entirety of the reactions because of every autonomous source acting at once. 

In this strategy, we will consider just a single autonomous source at any given moment. In this way, we need to wipe out the staying free sources from the circuit. We can take out the voltage sources by shorting their two terminals and also, the present sources by opening their two terminals. 

Thusly, we have to discover the reaction in a specific branch 'n' times if there are 'n' free sources. The reaction in a specific branch could be either present coursing through that branch or voltage over that branch. 

Strategy of Superposition Theorem 

Take after these means with a specific end goal to discover the reaction in a specific branch utilizing superposition theorem. 

Stage 1 − Find the reaction in a specific branch by thinking of one as free source and dispensing with the staying autonomous sources introduce in the system. 

Stage 2 − Repeat Step 1 for every single free source show in the system. 

Stage 3 − Add every one of the reactions keeping in mind the end goal to get the general reaction in a specific branch when every single autonomous source is available in the system. 


Note − We can't make a difference superposition theorem straightforwardly keeping in mind the end goal to discover the measure of energy conveyed to any resistor that is available in a direct circuit, just by doing the expansion of forces conveyed to that resistor because of every free source. 

We are Make Many Question. For Example...
superstition ||superposition ||law of superposition ||principle of superposition ||superstition definition  ||what is the principle of superposition ||superposition definition ||what is superposition ||law of superposition definition ||what is the law of ||superposition ||supposition definition ||what is superstition ||superposicion ||superposition of waves 


More Posts


Popular posts from this blog

Limitations of Terzaghi Theory

Limitations of Terzaghi Theory The value of the coefficient of consolidation has been assumed to be constant.  The distance d of the drainage path cannot be measured accurately in the field. The thickness of the deposit is generally variable, and an average value has to be estimated.  There is sometimes difficulty 1n locating the drainage face, sometimes thin previous seams that can act as good drainage face are missed in the boring operations. The equation is based on the assumption that the consolidation is one-dimensional. In the field, the consolidation is generally 3-dimensional. The lateral drainage may have a significant effect on the time rate of consolidation. The initial consolidation and secondary consolidation have been neglected. Sometimes these form an important part of the total consolidation. In actual practice, the pressure distribution may be far from linear or uniform. Read More Muller-Breslau principle

Price Guard Wire Method

Price Guard Wire Method Some form of  Price Guard Wire Method  is generally used to eliminate the errors caused by leakage currents over insulation. Fig. 3.14 illustrates the operation of This Method. In fig 3.14(a), a high resistance mounted on a piece of insulating material is measured by the ammeter voltmeter method. The micro-ammeter measures the sum of the current through the resistor (IR) and the current through the leakage path around the resistor. The measured value of resistance computed from the readings indicated on the voltmeter and the microammeter, will not be a true value but will be in error.   Figure 3.14 Application of  guard  circuit for measurement of high resistance In fig, 3.14 (b), the  guard  terminal has been added to the resistance terminal block. The  guard  terminal surrounds the resistance terminal entirely and is connected to the battery side of the micro-ammeter. The leakage current IL now

Negative Booster

Negative booster A negative booster is employed to conform to the regulation that the potential difference between any two points of the rail return shall not exceed 7 V. Two boosters, positive and negative, are used which are mechanically coupled together and driven by a DC motor. The positive booster is connected to the trolley wire (near the generating station) and the negative booster (separately excited) is connected to the track rail.  The 'positive booster' adds voltage to the line while the 'negative booster lowers the potential of the point it is connected to. As we go along the trolley wire away from the generating station/sub-station, the potential drop increases, and the voltage of the trolley wire falls. Since the current returns via the track rail points away from the generating station acquire high potentials. This potential is brought down by the negative boost provided by the negative booster. When the load is sufficiently far aw