Skip to main content

Transformer Cooling Methods

Transformer Cooling Methods

When a transformer is in operation heat is generated due to I2R losses in the windings and core losses. The removal of heat is called cooling.

Transformer Cooling Methods

The following methods are generally used to cool transformers.

Air Natural (AN) Cooling

In a dry-type self-cooled transformer, the natural circulation of the surrounding air is used for its cooling. The windings are protected from mechanical injury by a sheet metal enclosure. This type of cooling is a satisfied tory for low-voltage small transformers to a few kVA.

Air Blast (AB) Cooling

 The dry-type forced air-cooled transformer is similar to that of the dry-type self-cooled transformer with the addition that continuous blast of filtered cool air is forced through the core and windings for better cooling. The blast is produced by a fan.

Oil Natural (ON) Cooling

The majority of trans large rating have their windings and core immersed in oil which acts both as a cooling medium and an insulating medium. Oil-immersed transformers are enclosed in a sheet-steel tank. The heat produced in the cores and windings is passed to the oil. Heated oil becomes lighter and rises to the top and its place is taken by cool oil from the bottom of the tank. The heat of the oil is transferred to the walls of the tank by the natural circulation of the oil. The heat is then transferred to the surrounding atmosphere through natural radiation and convection. The oil gets cooler and falls to the bottom. Thus, the continuous natural circulation of oils takes place.

Plain tanks are economical to a rating of 25 kVA. Above this rating, the large cooling surface is generally provided by using corrugations, fins, tubes (circular or elliptical), and radiator tanks. 

Oil Blast (OB) Cooling

In this type of cooling, forced air is directed over cooling elements of the transformer immersed in oil.

Forced Oil and Forced Air Flow (OFB) Cooling 

Oil is circulated from the top of the tank of the transformer tank to a cooling plant. Cool oil is then returned to the bottom of the tank.

Forced Oil and Water (OFW) Cooling

In this type of cooling forced oil flow with water cooling of the oil in the external water heat exchanger takes place. This type of cooling is similar to OFB cooling except that the heat exchanger uses water instead of air for cooling oil. The water is circulated in cooling tubes placed in the heat exchanger.

Popular posts from this blog

Limitations of Terzaghi Theory

Limitations of Terzaghi Theory The value of the coefficient of consolidation has been assumed to be constant.  The distance d of the drainage path cannot be measured accurately in the field. The thickness of the deposit is generally variable, and an average value has to be estimated.  There is sometimes difficulty 1n locating the drainage face, sometimes thin previous seams that can act as good drainage face are missed in the boring operations. The equation is based on the assumption that the consolidation is one-dimensional. In the field, the consolidation is generally 3-dimensional. The lateral drainage may have a significant effect on the time rate of consolidation. The initial consolidation and secondary consolidation have been neglected. Sometimes these form an important part of the total consolidation. In actual practice, the pressure distribution may be far from linear or uniform. Read More Muller-Breslau principle

Price Guard Wire Method

Price Guard Wire Method Some form of  Price Guard Wire Method  is generally used to eliminate the errors caused by leakage currents over insulation. Fig. 3.14 illustrates the operation of This Method. In fig 3.14(a), a high resistance mounted on a piece of insulating material is measured by the ammeter voltmeter method. The micro-ammeter measures the sum of the current through the resistor (IR) and the current through the leakage path around the resistor. The measured value of resistance computed from the readings indicated on the voltmeter and the microammeter, will not be a true value but will be in error.   Figure 3.14 Application of  guard  circuit for measurement of high resistance In fig, 3.14 (b), the  guard  terminal has been added to the resistance terminal block. The  guard  terminal surrounds the resistance terminal entirely and is connected to the battery side of the micro-ammeter. The leakage current IL now

Negative Booster

Negative booster A negative booster is employed to conform to the regulation that the potential difference between any two points of the rail return shall not exceed 7 V. Two boosters, positive and negative, are used which are mechanically coupled together and driven by a DC motor. The positive booster is connected to the trolley wire (near the generating station) and the negative booster (separately excited) is connected to the track rail.  The 'positive booster' adds voltage to the line while the 'negative booster lowers the potential of the point it is connected to. As we go along the trolley wire away from the generating station/sub-station, the potential drop increases, and the voltage of the trolley wire falls. Since the current returns via the track rail points away from the generating station acquire high potentials. This potential is brought down by the negative boost provided by the negative booster. When the load is sufficiently far aw